Categories
Publications Technical

Stancor Amplifiers and Full Transformer Data c.1937

The Stancor ‘306’ 6-watt PP audio amplifier

Download the 1937 (‘third edition’) of Stancor Transformers’ ‘Amplimanual,’ a 24pp publication which conveniently combines schematics for ten original audio amplifiers with full data for their entire line of transformers.  If you (like me) have some pre-war Stancors lying around and you are unsure what exactly what the specs are, this is a godsend (blogsend?  awful).

Split into two parts due to size:

DOWNLOAD SCHEMATICS:Stancor_Amplimanual_Schematics_1937

DOWNLOAD 1937 STANCOR  DATA: Stancor_1937_Transformer_Specs

Schematics are provided for Stancor’s own 303, 305, 306, 312, 318, 320, 325, 335, and 360 audio amplifiers.  The first ‘3’ in the designation seems to represent this ‘third’ edition of the publication, and the second two digits correspond with the stated audio-output of the particular device.   Looking through the schematics, you will see the following tube types most often:  6F5, 6C5, 6J7, 80, 6V6, 76, 6N7, 6L6, 6A6, and 6A3.

Above, the schematic and parts list for the ‘303,’ a microphone pre-amp.  I will be building one of these shortly.  I was most excited by this publication due to the 76 tubes in a few of the circuits.  I am close to completion on a novel microphone preamp design that uses a 76 tube as the input stage and I am in-general trying to get more into the early ‘two-digit-designation’ tubes: the 75, the 76, the 42, 80, etc…   we are looking back etc etc.

Above, an image of the Stancor factory which describes a certain transformer-manufacturing process which I will not put into text because I get enough porn spam as it is. 

Several completed Stancor amplifier units

Above, several transformer units photographed for the catalog with their model-numbers included via practical photography.  What a great design move this is.  I bet we see a return to this product-photography technique in the coming years.  ‘If you can find a way to do-it practically (rather than digitally), then do it practically!’

3 replies on “Stancor Amplifiers and Full Transformer Data c.1937”

I was fortunate in that I had a lot of old transformers to experiment with WITHOUT having data on them so I had to learn to figure out what they were by testing. That was invaluable experience.

Generally, with a sine wave generator and a DMM you can figure out 99% of transformers as to intended function and the necessary specs. Power throughput is generally a matter of weight, then you test for temperature rise to see if it’s what you need in terms of capacity.

But it’s a lot of fun to read the manuals too-as long as you understand they were trying to sell transformers! Ed Romney in his “Fixing Up Nice Old Radios” has some very useful catalog excerpts and comments. He is dead and I believe his widow is as well, now. I hope someone reprints his books.

Good catalog, kinda like the Thordarson manuals of the era, some of the early UTC too.

I am in search for a copy of UNIVERSAL RECTIFIER TRANSFORMERS (Bulletin

#518-R, Dated 15 July 1972).
RT-201 – 202 – 204 – 206 – 208 – 2012 – 400 – 401 – 402 – 408 and 4012. I have
used the R-201 & 202 on my model railroad layout. During the move from California to here they for some reason came up lose. If you can help with the above reference list plus where I can acquire them, please let me know. Thank you, Jesse

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.