DOWNLOAD THE COMPLETE ARTICLE:Constant Output Broadcast Amplifier
The article details the operation and construction of the above-illustrated broadcast-remote mixer/amp, which includes a limiter. While the overall unit is probably not something you’d want to ‘F’ with, the limiter component could be added to a DIY tube mic preamp (perhaps with a true-bypass switch). One caveat: as the article warns, there are apparently ‘thumping’ artifacts inherent to this circuit, which was acceptable in its intended operation since it was designed for voice-frequency.
This month on Preservation Sound Radio: nine side-filling tracks from 1970 thru 1986, all from…
This month's show airs Tuesday 2.20.24 at 8:30PM -11:25PM EST on WPKN 89.5 FM in…
The first Preservation Sound Radio program of 2024 will air Tuesday January 16 at 8:30PM…
As aired 8:30PM-11:30PM 12.19.23 on WPKN 89.5 FM Bridgeport. Enjoy. PSR DEC2023 sequence 1. Click…
Tonight 11.21.23 8:30 PM EST: special advance broadcast of the P/S Winter 2024 Mixtape. Catch…
Here's the tracklist for the 2023 Preservation Sound Summer Mixtape, to be broadcast 8:30PM EST…
View Comments
would this work at the front end of guitar amp?
Hi. It's possible, but it would be ill advised. I would recommend putting at least one voltage-gain stage ahead of it, and an interstate volume control as well. c.
So, what makes this different than a simple single stage tube amp? Is it the configuration of the capacitors that cause the compression?
I am not sure exactly how it works but it sounds awful and i don't recommend that anyone build it, total waste of time.
hey...i know it's an old thread but could you tell my your experience more why is it awful? Mine sounding pretty awesome...cheers!
I found this thread a few months ago, I find very easy to give a try, did you use 6SL7? what voltage did you apply?
Is strange 470K for plate, did you try lower resistance? I will like a clean sound.
Hi, what type of transformers do you recommend for mic input and line output? I have no experience with this type of circuit. What voltage did you apply? Thanks a lot!